Embedded Handbook/Boards/Pandaboard

Little-endian ARMv7-A from pandaboard.org.

Documentation

Currently, the Pandaboard is supported on Gentoo thanks to pandaboard.org who provided us with hardware to create and document the installation process.

• Documentation about installing Gentoo on the Pandaboard

Pandaboard specifications

<syntaxhighlight lang="text"># TI OMAP SoC 4430
# Dual-core ARMv7-A 1GHz Cortex-A9 processor
# 1GB DDR2 RAM
# USB-based SMSC 9514-JZX Ethernet controller and USB HUB
# LS Research WL1271 SDIO module (WLAN, BT, FM)
#
# 1x SDHC/MMC/SDIO slot
# 2x USB 2.0 port
# 1x mini-USB 2.0 OTG port
# 1x HDMI out
# 1x DVI-D out(HDMI connector)
# 1x Audio IN
# 1x Audio OUT
# 1x RS232 serial port
# 1x RJ45 port

# Reset and user-defined button</syntaxhighlight>

/proc/cpuinfo

<syntaxhighlight lang="text">Code Listing 3.1: CPU Info
Processor	: ARMv7 Processor rev 2 (v7l)
processor	: 0
BogoMIPS	: 2013.49

processor	: 1
BogoMIPS	: 1963.08

Features	: swp half thumb fastmult vfp edsp thumbee neon vfpv3 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x1
CPU part	: 0xc09
CPU revision	: 2

Hardware	: OMAP4430 Panda Board
Revision	: 0010
Serial		: 0000000000000000</syntaxhighlight>

External resources

• Pandaboard.org

This page is based on a document formerly found on our main website gentoo.org.
The following people contributed to the original document: Mike Frysinger, Ned Ludd, Robin H. Johnson, Alex Tarkovsky, Alexey Shvetsov, Raúl Porcel, Joshua Saddler on April 28, 2013.
They are listed here because wiki history does not allow for any external attribution. If you edit the wiki article, please do not add yourself here; your contributions are recorded on each article's associated history page.