< Embedded Handbook < Boards
Embedded Handbook/Boards/Marvell Sheevaplug
Little-endian ARMv5TE from Marvell.
Documentation
Currently, the Marvell Sheevaplug is supported on Gentoo thanks to Marvell who provided us with hardware to create and document the installation process.
Marvell Sheevaplug specifications
Board specifications:
CODE
<syntaxhighlight lang="text"># Marvell Kirkwood SoC 88F6281 # Marvell Feroceon ARMv5TE 1200MHz processor # 512MB DDR2 RAM # 512MB NAND Flash # Marvell Gigabit Ethernet controller # 1x SDHC slot # 1x USB 2.0 port # 1x mini-USB 2.0 port (for integrated JTAG and serial access) # Reset button</syntaxhighlight>
/proc/cpuinfo
CPU info:
FILE
/proc/cpuinfo<syntaxhighlight lang="text">Processor : Feroceon 88FR131 rev 1 (v5l)
BogoMIPS : 1192.75
Features : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant : 0x2
CPU part : 0x131
CPU revision : 1
Hardware : Marvell SheevaPlug Reference Board
Revision : 0000
Serial : 0000000000000000</syntaxhighlight>
External resources
This page is based on a document formerly found on our main website gentoo.org.
The following people contributed to the original document: Mike Frysinger, Ned Ludd, Robin H. Johnson, Alex Tarkovsky, Alexey Shvetsov, Raúl Porcel, Joshua Saddler on April 28, 2013.
They are listed here because wiki history does not allow for any external attribution. If you edit the wiki article, please do not add yourself here; your contributions are recorded on each article's associated history page.
This article is issued from Gentoo. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.